Drilling machine Type 4 (Used)

€1,200.00*

excl. VAT plus shipping

Private customer Business customer

Available, delivery time: 2-5 days

Product number: 44640g

Product information "Drilling machine Type 4 (Used) "

Most of our used machines have been in service for only one season. We thoroughly service each unit afterward. There are visible signs of use, but they do not affect functionality.

The Easyfix drilling machine enables precise drilling into watered and unwatered trees up to a height of 2.5 m. The powerful Bosch motor (230 V / 2.1 kW, 6,500 rpm) ensures fast drilling in just a few seconds. This allows for drilling approximately 120 trees per hour.

To do this, gently pull the net up the trunk (for watered trees), place the tree in the conical-shaped receiving funnel, and align the tip with the height-adjustable spacer rod (yellow). Pressing the foot pedal while the machine is running drills a vertical hole into the underside of the tree trunk.

When used in combination with our display stands and water stands, this drilling process enables an attractive product presentation and helps build strong customer loyalty.

Scope of Delivery:

Drilling machine with 5 m power cord
2 m stainless steel rod
Spacer rod
1 pre-assembled drill bit and 1 replacement drill bit

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Tannen-Paradies GmbH

Röblingstraße 150

12105 Berlin

Deutschland

Accessories

HSS drillbit 16 mm (for Easyfix drill)

Special tapered drillbit with a diameter of 16 mm, made from high-alloy tool steel. Suitable for Easyfix drills types 1/2/3/4/5. Designed for drilling holes in Christmas trees for display and setting up using the Easyfix system.Lifespan: approx. 3,000 drill holes. The drill tip can be re-sharpened afterwards.Required shank: 16 mm

€37.10*

Distance bar for drilling machine

Spare part suitable for the Easyfix drilling machine, types 1/2/3/4/5.A straight and fully functional distance bar is essential for precise drilling. If it is bent, it should always be replaced to ensure the tree can be correctly aligned during drilling. If the rod no longer locks properly, preventing it from being adjusted to the relevant tree size on the stainless steel rod, we also recommend replacing it.

€40.00*

Stainless steel rod, 200 cm

Stainless steel rod 35 x 35 x 2000 mm. When used in conjunction with the Easyfix drill, this allows trees to be aligned and drilled up to a height of 2.5 metres. Made from stainless steel for maximum stability and durability. Compatible with the Easyfix drilling machines type 1/2/3/4/5.

€80.00*

Stainless steel rod, 273 cm

Stainless steel rod 35 x 35 x 2730 mm. When used in conjunction with the Easyfix drill, this allows trees to be aligned and drilled up to a height of 3.5 metres. Made from stainless steel for maximum stability and durability. Compatible with the Easyfix drilling machines type 1/2/3/4/5.

€80.00*

Funnel with 37 mm opening

Standard funnel with 37 mm opening. Suitable for Easyfix drilling machines type 2/3/4/5.

€35.00*

Cone incl. drill chuck (narrow version)

Suitable for drilling small trees from a height of 50 cm and a very narrow trunk diameter of > 2.9 cm. Set consisting of cone (opening ⌀ 29 mm) incl. matching drill chuck (⌀ 27 mm) in narrow design. Suitable for the Easyfix drill type 2/3/4/5.

€79.00*

Electrical unit for drilling machine

Electrical unit including on/off switch and emergency stop. Compatible with all Easyfix drilling machines, types 2/3/4/5.IMPORTANT: Electrical work must only be carried out by qualified electricians or under their supervision. Always disconnect the machine from the mains before carrying out any work!

€85.00*

Power lead with plug, 5 m

5 m power lead including Schuko plug (protection class IP44), suitable for Easyfix drills types 1/2/3/4/5 and for the tree-shaking machine (item no. 44800). IMPORTANT: Electrical work must only be carried out by qualified electricians or under their supervision. Always disconnect the machine from the mains before carrying out any work!

€20.00*

Plastic plain bearings

Maintenance-free dry plain bearings made of plastic (internal diameter: 18 mm). Suitable for Easyfix drilling machine, types 2/3/4/5.The bearings are fitted in pairs on both sides of the carriage to which the angle grinder is mounted. Here, they ensure that the component glides smoothly along the two chrome rods, thereby enabling the machine to be operated effortlessly via the foot pedal.Important: This is a dry plain bearing. It is not necessary to grease the bearings!To replace the bearings, release the chrome rods from their mountings in the machine and pull both rods out. Using circlip pliers for bores (internal rings, i.e. the pliers close when squeezed), remove the upper and lower circlips securing the bearing in order to replace it. Then reinsert the circlips, reinsert the chrome rods and secure them.

€3.00*

2x hexagon set screws for drill chuck

Spare set screws (1 pair) for securely fixing the drill bit in the drill chuck. Suitable for Easyfix drills, types 1–5. Technical data: M8 external thread, 4 mm internal hexagon.To change the drill bit, slightly loosen the side grub screws. Then pull the drill bit out upwards and insert the sharpened or new drill bit so that the flattened side faces towards the grub screws. Then tighten both screws hand-tight again.

€6.00*

Drilling machine Type 4 (Used)

Product information "Drilling machine Type 4 (Used) "

Login

Preise mit oder ohne MwSt. anzeigen?