Easyfix pins for presentation systems and Christmas tree stands

When purchasing the pins, please bear in mind their intended use:

Display pins are suitable for building your own sales and display stands. They sit loosely in the trunk, so that trees can be removed and replaced quickly.

Fixed pins, on the other hand, are intended for building low-cost stands for end customers – such as wooden crosses, which you can offer alongside the tree.

Tip

Pin to hammer in from below

With our crimped drive-in pin, you can make your own tree stand in no time at all. Simply pre-drill the hole and drive the pin in from below – that’s it! Depending on the base area of the stand, the pin provides a secure hold for trees up to a maximum height of 2.25 m. NOTE: The pin is fixed in place (i.e. once the tree is fitted, it sits firmly on the pin) and is therefore not suitable for display on the point of sale!

€0.99*

Pin with plate

A sturdy and cost-effective display solution for your sales area!The iron pin with a welded-on plate (100 x 100 x 5 mm) is the perfect base for a secure and attractive product display on pallets or wooden planks.Made from hardened steel, electro-galvanised and therefore optimally protected against corrosion. Weighing just 0.48 kg, the spike offers impressive stability for trees up to 2.5 m in height.

€4.26*

Pin with round plate

A sturdy and cost-effective display solution for your sales area!The iron pin with plate (68 x 3 mm) is the perfect base for a secure and attractive product display on pallets or wooden planks.Made from hardened steel and electro-galvanised, it is optimally protected against corrosion. Weighing just 0.2 kg, the spike offers impressive stability for trees up to 2 m in height.

€2.55*

Ground pin, 390 mm

Sturdy pin for displaying trees on unpaved ground, with a diameter of 29 mm and a shaft length of 390 mm. Provides a secure hold for trees up to 2.2 m in height. Thanks to its galvanised finish, it is ideally suited for outdoor use – a simple and cost-effective solution for displaying Christmas trees in the field or directly in the plantation.To use, we recommend driving the pin into the ground using a piece of round timber (drilled) or a metal round tube, together with a rubber mallet.

€5.21*

Ground pin, 580 mm

Sturdy pin for displaying trees on unpaved ground, with a diameter of 29 mm and a shaft length of 580 mm. Provides a secure hold for trees up to 2.5 m in height. Thanks to its galvanised finish, it is ideally suited for outdoor use – a simple and cost-effective solution for displaying Christmas trees in the field or directly in the plantation.To use, we recommend driving the pin into the ground using a piece of round timber (drilled) or a metal round tube, together with a rubber mallet.

€6.50*

Welding pin, 105 mm

Display pin made of galvanised steel, 105 mm long (including a 25 mm shaft), for welding. Ideal for displaying trees up to 2.5 m tall outdoors.

€1.65*

Pin to hammer in from above

With our crimped drive-in pin, you can make your own tree stand in no time at all. Simply pre-drill the hole and drive the pin in from above – that’s it! Depending on the base area of the stand, the pin provides a secure hold for trees up to a maximum height of 2.25 m. NOTE: The pin is fixed in place (i.e. once the tree is fitted, it sits firmly on the pin) and is therefore not suitable for display on the point of sale!

€1.22*

Details

"Line Up" middle pin

A systematic way to display Christmas trees!Pin compatible with the ‘Line Up’ system. When used in combination with the Line Up attachment arm (item no. 44470), each middle pin creates an additional display space. Suitable for trees up to approx. 1.5 m in height.Contents: Threaded pin, M12 nut and washer.The “Line Up” system is the ideal solution for anyone wishing to display smaller Christmas trees in a row whilst keeping walkways clear. The 78 cm long ‘arms’ are fitted onto a standard 3/4-inch water pipe (Ø 27 mm) and can then be arranged flexibly to suit the size of the trees.This allows you to display your Christmas trees perfectly in a line – whether indoors, in a sales marquee or for outdoor sales. The galvanised finish ensures durability for outdoor use.NOTE: The pin is fixed (i.e. once the tree is fitted, it sits firmly on the pin) and is therefore not suitable for display at the point of sale!

€2.26*

CLEARANCE ITEM Fixed pin with round plate

Perfect for building your own wooden stands for end customers. The fixed pin with round plate (68 x 3 mm) can be easily screwed onto a wooden cross using up to eight screws. Depending on the base area of the stand, it provides a secure hold for trees up to a maximum height of 2.5 m.NOTE: The pin is fixed (i.e. once the tree is fitted, it sits firmly on the pin) and is therefore not suitable for display on the shop floor!Note: Clearance stock – this item is only available in limited quantities and will not be restocked.

€2.00* €2.55* (21.57% saved)

CLEARANCE ITEM Weld-on display spike, 83 mm

Weld-on display spike made of galvanised steel, 83 mm in length. Ideal for displaying trees up to 2.5 m tall outdoors.Note: Clearance stock – this item is only available in limited quantities and will not be restocked.

€1.40* €1.65* (15.15% saved)

Pin with thread

Perfect for building your own wooden stands for end customers – with our sturdy threaded pin, assembly is a breeze!Here’s how: Pre-drill the holeSlide the washer onto the pinTap the M10 drive-in nut into place from belowScrew the pin in from aboveDepending on the base area of the stand, the pin provides a secure hold for trees up to a maximum height of 2.5 m.Contents: Threaded spike including M10 drive-in nut and washer.NOTE: The pin is fixed (i.e. once the tree is fitted, it sits firmly on the pin) and is therefore not suitable for display at the point of sale!

€1.75*

Tip

Plastic pin (glass fibre reinforced), black

Black, glass fibre-reinforced plastic pin for building your own wooden stands. Suitable for trees up to 1.5 m in height. Supplied with a pre-assembled screw (6 x 93 mm, hexagon socket).To install, position the pin on the wooden surface and screw it in. The wood should be at least 36 mm thick. NOTE: The pin is fixed (i.e. once the tree is fitted, it sits firmly on the pin) and is therefore not suitable for display at the point of sale!

€0.79*

Tip

Plastic pin, green

Green plastic pin for building your own wooden stands. Suitable for trees up to 1.25 m in height. Supplied with a pre-assembled screw (6 x 80 mm, hexagon socket).To install, position the pin on the wooden surface and screw it in. The wood should be at least 22 mm thick. NOTE: The pin is fixed (i.e. once the tree is fitted, it sits firmly on the pin) and is therefore not suitable for display at the point of sale!

€0.69*

Threaded pin with round plate

Perfect for building your own wooden stands for end customers. The threaded pin with round plate (68 x 3 mm) can be easily screwed onto a wooden cross using four screws. Depending on the base area of the stand, it provides a secure hold for trees up to a maximum height of 2.5 m. NOTE: The pin is fixed in place (i.e. once the tree is fitted, it sits firmly on the pin) and is therefore not suitable for display on the point of sale!

€2.86*

Welding pin, 88 mm

Display pin made of galvanised steel 88 mm long for welding. Ideal for displaying trees up to 2.5 m tall outdoors.

€1.65*

When purchasing the pins, please bear in mind their intended use:

Filter products

Preise mit oder ohne MwSt. anzeigen?